Background
Two SR-71 aircraft have been used by NASA as testbeds for high speed,
high altitude aeronautical research. The aircraft, an SR-71A and
an SR-71B pilot trainer aircraft are based at NASA's Dryden Flight
Research Center, Edwards, California.
Developed for the USAF as reconnaissance aircraft more than 30
years ago, SR-71s are still the world's fastest and highest-flying
production aircraft. The aircraft can fly more than 2200 mph (Mach
3+ or more than three times the speed of sound) and at altitudes
over 85,000 feet. As research platforms, the aircraft can cruise
at Mach 3 for more than one hour. For thermal experiments, this
can produce heat soak temperatures of over 600 degrees (F). This
operating environment makes the aircraft excellent platforms to
carry out research and experiments in a variety of areas -- aerodynamics,
propulsion, structures, thermal protection materials, high-speed
and high-temperature instrumentation, atmospheric studies, and sonic
boom characterization.
Project Summary
SR-71 in flight.
Two SR-71 aircraft were used by NASA as testbeds for high-speed,
high-altitude aeronautical research. The aircraft, an SR-71A and
an SR-71B pilot trainer aircraft were based at NASA's Dryden Flight
Research Center, Edwards, Calif. They have been loaned to NASA by
the U.S. Air Force. Developed for the USAF as reconnaissance aircraft
more than 30 years ago, SR-71s are still the world's fastest and
highest-flying production aircraft.
The aircraft can fly more than 2200 miles per hour (Mach 3+ or
more than three times the speed of sound) and at altitudes of over
85,000 feet. This operating environment makes the aircraft excellent
platforms to carry out research and experiments in a variety of
areas — aerodynamics, propulsion, structures, thermal protection
materials, high-speed and high-temperature instrumentation, atmospheric
studies and sonic boom characterization.
Data from the SR-71 high-speed research program may be used to
aid designers of future supersonic/hypersonic aircraft and propulsion
systems, including a high-speed civil transport.
The SR-71 program at Dryden was part of NASA's overall high-speed
aeronautical research program, and projects involve other NASA research
centers, other government agencies, universities and commercial
firms.
Research at Mach 3
One of the first major experiments to be flown in the NASA SR-71 program was a laser air-data collection system. It used laser light instead of air pressure to produce airspeed and attitude reference data such as angle of attack and sideslip normally obtained with small tubes and vanes extending into the air stream or from tubes with flush openings on an aircraft's outer skin. The flights provided information on the presence of atmospheric particles at altitudes of 80,000 feet and above where future hypersonic aircraft will be operating. The system used six sheets of laser light projected from the bottom of the "A" model. As microscopic-size atmospheric particles passed between the two beams, direction and speed were measured and processed into standard speed and attitude references. An earlier laser air data collection system was successfully tested at Dryden on an F-l04 testbed.
The first of a series of flights using the SR-71 as a science camera platform for NASA's Jet Propulsion Laboratory, Pasadena, Calif., was flown in March 1993. From the nosebay of the aircraft, an upward-looking ultraviolet video camera studied a variety of celestial objects in wavelengths that are blocked to ground-based astronomers.
The SR-71 has also been used in a project for researchers at the University of California-Los Angeles (UCLA) who were investigating the use of charged chlorine atoms to protect and rebuild the ozone layer.
Photo of an SR-71 parked on the tarmac.
In addition to observing celestial objects in the various wavelengths, future missions could include "downward" looking instruments to study rocket engine exhaust plumes, volcano plumes and the Earth's atmosphere, as part of the scientific effort to reduce pollution and protect the ozone layer.
The SR-71, operating as a testbed, also has been used to assist in the development of a commercial satellite-based, instant wireless personal comunications network, called the IRIDIUM system, under NASA's commercialization assistance program. The IRIDIUM system was being developed by Motorola's Satellite Communications Division. During the development tests, the SR-71 acted as a "surrogate satellite" for transmitters and receivers on the ground.
The SR-71 also has been used in a program to study ways of reducing sonic boom overpressures that are heard on the ground much like sharp thunderclaps when an aircraft exceeds the speed of sound. Data from the study could eventually lead to aircraft designs that would reduce the "peak" of sonic booms and minimize the startle affect they produce on the ground.
Instruments at precise locations on the ground record the sonic booms as the aircraft passes overhead at known altitudes and speeds. An F-16XL aircraft was also used in the study. It was flown behind the SR-71, probing the near-field shockwave while instrumentation recorded the pressures and other atmospheric parameters.
In November 1998 the SR-71 completed the NASA/Lockheed Martin Linear Aerospike SR-71 experiment (LASRE). LASRE was a small, half-span model of a lifting body with eight thrust cells of an aerospike engine, mounted on the back of an SR-71 aircraft and operating like a kind of "flying wind tunnel."
During seven flights, the experiment gained information that may help Lockheed Martin predict how operation of aerospike engines at altitude will affect vehicle aerodynamics of a future reusable launch vehicle.
Dryden's Mach 3 History
Dryden has a decade of past experience at sustained speeds above
Mach 3. Two YF-12 aircraft were flown at the facility between December
1969 and November 1979 in a joint NASA/USAF program to learn more
about the capabilities and limitations of high speed, high-altitude
flight. The YF-12s were prototypes of a planned interceptor aircraft
based on a design that later evolved into the SR-71 reconnaissance
aircraft.
Research information from the YF-12 program was used to validate
analytical theories and wind-tunnel test techniques to help improve
the design and performance of future military and civil aircraft.
The American supersonic transport project of the late 1960s and
early 1970s would have benefited greatly from YF-12 research data.
The aircraft were a YF-12A (tail #935) and a YF-12C (tail #937).
Tail number 937 was actually an SR-71 that was called a YF-12C for
security reasons. These aircraft logged a combined total of 242
flights during the program. A third aircraft, a YF-12A (tail #936),
was flown by Air Force crews early in the program. It was lost because
of an inflight fire in June l971. The crew was not hurt.
The YF-12s were used for a wide range of experiments and research.
Among the areas investigated were aerodynamic loads, aerodynamic
drag and skin friction, heat transfer, thermal stresses, airframe
and propulsion system interactions, inlet control systems, high-altitude
turbulence, boundary layer flow, landing gear dynamics, measurement
of engine effluents for pollution studies, noise measurements and
evaluation of a maintenance monitoring and recording system. On
many YF-12 flights medical researchers obtained information on the
physiological and biomedical aspects of crews flying at sustained
high speeds.
From February 1972 until July 1973, a YF-12A was used for heat
loads testing in Dryden's High Temperature Loads Laboratory (now
the Thermostructures Research Facility). The data helped improve
theoretical prediction methods and computer models of that era dealing
with structural loads, materials and heat distribution at up to
800 degrees (F), the same surface temperatures reached during sustained
speeds of Mach 3.
SR-71 Specifications and Performance
The SR-71 was designed and built by the Lockheed Skunk Works, now
the Lockheed Martin Skunk Works. SR-71s are powered by two Pratt and
Whitney J-58 axial-flow turbojets with afterburners, each producing
32,500 pounds of thrust. Studies have shown that less than 20 percent
of the total thrust used to fly at Mach 3 is produced by the basic
engine itself. The balance of the total thrust is produced by the
unique design of the engine inlet and "moveable spike" system
at the front of the engine nacelles and by the ejector nozzles at
the exhaust which burn air compressed in the engine bypass system.
Speed of the aircraft is announced as Mach 3.2 — more than
2000 miles per hour (3218.68 kilometers per hour). They have an
unrefueled range of more than 2000 miles (3218.68 kilometers) and
fly at altitudes of over 85,000 feet (25908 meters).
As research platforms, the aircraft can cruise at Mach 3 for more
than one hour. For thermal experiments, this can produce heat soak
temperatures of over 600 degrees (F). The aircraft are 107.4 feet
(32.73 meters) long, have a wing span of 55.6 feet (16.94 meters,
and are l8.5 feet (5.63 meters) high (ground to the top of the rudders
when parked). Gross takeoff weight is about 140,000 pounds (52253.83
kilograms), including a fuel weight of 80,000 pounds (29859.33 kilograms).
The airframes are built almost entirely of titanium and titanium
alloys to withstand heat generated by sustained Mach 3 flight. Aerodynamic
control surfaces consist of all-moving vertical tail surfaces above
each engine nacelle, ailerons on the outer wings and elevators on
the trailing edges between the engine exhaust nozzles.
A Three View drawing of the SR-71.
The two SR-71s at Dryden have been assigned the following NASA tail
numbers: NASA 844 (A model), military serial 64-17980, manufactured
in July 1967, and NASA 831 (B model), military serial 64-17956,
manufactured in September 1965. From 1991 through 1994, Dryden also
had another "A" model, NASA 832, military serial 64-17971,
manufactured in October 1966. This aircraft was returned to the
USAF inventory and was the first aircraft reactivated for USAF reconnaissance
purposes in 1995.
The SR-71 last flight took place in October 1999.
The LASRE experiment was designed to provide in-flight data to
help Lockheed Martin evaluate the aerodynamic characteristics and
the handling of the SR-71 linear aerospike experiment configuration.
The goal of the project was to provide in-flight data to help Lockheed
Martin validate the computational predictive tools it was using
to determine the aerodynamic performance of a future reusable launch
vehicle.
The joint NASA, Rocketdyne (now part of Boeing), and Lockheed Martin
Linear Aerospike SR-71 Experiment (LASRE) completed seven initial
research flights at Dryden Flight Research Center. Two initial flights
were used to determine the aerodynamic characteristics of the LASRE
apparatus (pod) on the back of the SR-71. Five later flights focused
on the experiment itself. Two were used to cycle gaseous helium
and liquid nitrogen through the experiment to check its plumbing
system for leaks and to test engine operational characteristics.
During the other three flights, liquid oxygen was cycled through
the engine. Two engine hot-firings were also completed on the ground.
A final hot-fire test flight was canceled because of liquid oxygen
leaks in the test apparatus.
The LASRE experiment itself was a 20-percent-scale, half-span model
of a lifting body shape (X-33) without the fins. It was rotated
90 degrees and equipped with eight thrust cells of an aerospike
engine and was mounted on a housing known as the "canoe,"
which contained the gaseous hydrogen, helium, and instrumentation
gear. The model, engine, and canoe together were called a "pod."
The experiment focused on determining how a reusable launch vehicle’s
engine flume would affect the aerodynamics of its lifting-body shape
at specific altitudes and speeds. The interaction of the aerodynamic
flow with the engine plume could create drag; design refinements
looked at minimizing this interaction. The entire pod was 41 feet
in length and weighed 14,300 pounds. The experimental pod was mounted
on one of NASA’s SR-71s, which were at that time on loan to
NASA from the U.S. Air Force.
Lockheed Martin may use the information gained from the LASRE and
X-33 Advanced Technology Demonstrator Projects to develop a potential
future reusable launch vehicle. NASA and Lockheed Martin were partners
in the X-33 program through a cooperative agreement. The goal of
that program was to enable significant reductions in the cost of
access to space and to promote creation and delivery of new space
services and activities to improve the United States’s economic
competitiveness. In March 2001, however, NASA cancelled the X-33
program.
The top acknowledged speed of an SR-71 is in excess of 2,200 miles
per hour. It's hard for most of us to understand how fast that is.
How about thirty-five miles per minute? How about 3,100 feet per
second? Compare that with the muzzle velocity of a 30-06 rifle (about
3,000 feet per second) and you'll see that Superman isn't the only
one who travels "faster than a speeding bullet."
Not only is the SR-71 fast, it also has great endurance. The SR-71
can sustain speeds in excess of Mach 3 for long periods of time
and refuel in the air. These characteristics have helped it earn
the following speed records.
New York to London
|
1 hr., 54 min., 56.4 sec. |
| London to Los Angeles |
3 hrs., 47 min., 35.8 sec.
|
| Los Angeles to Washington, DC |
1 hr., 4 min., 20 sec.
|
| West Coast to East Coast USA |
1 hr., 7 min., 54 sec. |
| St. Louis to Cincinnati |
8 min. |
| Kansas City to Washington, DC |
26 min. |
|